Oil-Filled Device | High-Altitude Oil Immersed Transformer

A:After power outage, use dry compressed air (pressure ≤ 0.3 MPa) for blowing; stubborn dust can be gently brushed off with a brush; water or chemical cleaners must not be used; after cleaning, measure the insulation resistance again.

A:It is usually one month. The exact delivery time will be affected by the product and the location of use.

A:Use copper busbars or cables for connection, with the conductor cross-section meeting the current-carrying requirements; the connection points need to be treated with tin plating or silver plating to reduce contact resistance; install lightning arresters and disconnect switches on the high-voltage side to facilitate maintenance; add insulating covers for the busbars on the low-voltage side and mark the phase sequence; after connection, check the insulation and phase sequence to ensure there are no errors.